SPECIALS back to home
UPDATE on PROJECT MEAN MACHINE
WE SELL ONLY THE BEST! ALL PARTS EITHER NEW OR IN MINT CONDITION
PRICES BELOW DO NOT INCLUDE SHIPPING CHARGES
(technical information FREE when you buy from me) CONTACT ME
[I am open to barter, trade, plus cash, and difference on specific parts on this "specials" page]
My parts, both used and new, are in "mint condition" - not as dirty, damaged parts I have recently purchased from businesses across the U.S.A.
USED CORVETTE PARTS FOR SALE - MAKE OFFER
Oil Pan LS-7, 5 quart, fits 1965-74 Corvette 427 to 454 (recently painted black)
Oil Pump & Screen LS-7, use with oil pan Corvette
Pistons TRW .300 dome, 11:1 compression ratio, includes: wrist pins, fits 427 V-8 (8)
Cam L-88, factory, fits 427 V-8, 430 HP & 435 HP & push rods (16) and rocker arms (16)
Flywheel Steel factory 168 tooth, 14"
Clutch Disc Center Force II, 11"
Pressure Plate Center Force II, 11"
fits standard 4 speed transmissions 1966-74, 350, 427 and 454
NEW CORVETTE PARTS FOR SALE
Holley Carburetor # 4405-1, (bench and flow tested)
2 bbl, 350 CFM, 427 (3x2)MT, Center Carburetor fits 1968 - 1969; 427 Corvette Tri-power .... $549
Holley Carburetor # 0-3659-466 CFM 427 (3x2) Outboard carburetor fits 1967-69 Corvette tri-power....$275
THIS ITEM HAS BEEN SOLD. ANOTHER SATISFIED CUSTOMER.
Iski Cam Hi Lift # 396277, grind Z-77, solid lifters,
valve lift .590, .050 Duration 264, Lobe Center .108, valve lash .028 .... $74 TWO YEAR WARANTY
#8571 MSD Pro-Billet Tach Drive Distributor For Chevrolet Cars,Trucks & Corvette Engines: 366,396,427,454_Fits 1965 to 1987 **{ Both HEI & SOCKET Distributors } $219.00 ** click for photo
THIS ITEM HAS BEEN SOLD. ANOTHER SATISFIED CUSTOMER.
WARNING:
If you do business with PERFORMANCE AUTOMOTIVE WAREHOUSE
21001 Nordoff St Chatsworth CA.
They do not refund your money; Even if they recommend the wrong part.
You bought it - You Eat It!
I NEED: Corvette 1968-1969 complete side exhaust, covers, mufflers (pipes), and installation hardware.
fits big block 427 V-8 Corvettes
I NEED: GAS LOCKING CAPS, Vented and Non-Vented (for 1963-1974) Corvettes) click for photo
Gas Caps vented fit 1963-1974 are chrome, flat , with snap in three inner locking prongs;
GM# 985919 chrome - casting # inside: EE54-3-Z-75 - original mfr: EC Products
Other mfr: NAPA BALLKAMP and STANT also made similar locking gas caps 1960's through 1970's
CORVETTE HOOD: Click For Photo 427 1968 Original 67,000 miles, wiper door assembly complete, grille, hinges, brackets, limiting rod, wiper door electric switch, wiper door vacuum actuator, vacuum actuator relay; (includes all miscellaneous hardware) Fits 1968-1972 Corvettes (EXTRA CLEAN! NEVER WRECKED!) Package Price a steal at $2000 (Shipping Charges Extra)
CORVETTE AM/FM FACTORY ORIGINAL RADIO: Click For Photo Push button control bar and miscellaneous hardware; (Fits 1968-1976) $200
Corvette antenna fixed mast factory plus cable and miscellaneous $40
THIS ITEM HAS BEEN SOLD. ANOTHER SATISFIED CUSTOMER.
WHEELS: Click For Photo AMERICAN EAGLE 5 SPOKE MIRROR POLISHED (4) 15" x 8" Bolt pattern 5 on 4 3/4, aluminum alloy; Also includes: (4) chrome mag caps and (4) chrome valve stems/chrome caps. Fits all GM Products; Still sell for $279 /wheel. Package Price a steal at $525
WHEELS: Click For Photo (4) 15" x 7", 5 on 4 3/4 bolt pattern, aluminum alloy; Includes valve stems/caps. Use acorn lug nuts. Fits all 4x4, SUV's, almost all GM and others with above bolt pattern. A steal at $325
STEERING WHEEL: Click For Photo (blue, original 1960 Impala) with chrome Impala emblem, horn ring intact. Fits 1949-1970's Chevrolet and all GM cars and trucks. A steal at $325
WHEEL LOCKS: stainless steel/chrome acorn, 7/16 CWA. New; Fits Corvette and all GM. A steal at $30
WHEEL LOCKS: chrome mag type, 7/16 McGard; Used; Fits Corvette and all GM. A steal at $25
CORVETTE SHOCK ABSORBERS: Gabriel Gas VST
(2) Front #69625 (2) Rear #69622 (fits 1963-1982 Corvette) $175 for all four
CARBURETOR HOLLEY: Click For Photo primary; (center) 2 BBL. #0-4055-1; Includes brass float (no plastic) remanufactured; Fits 1968-69 427 Corvette tri-power; (price requires your rebuildable carb/core in exchange. A steal at $395
AIR CLEANER: Corvette, tri-power, screen; Fits 1968-69. A steal at $29
TACH DRIVE: high performance, stock T.I. distributor, Corvette; (original 20,000 miles) LIKE NEW! New distributor cap, rotor, vacuum advance; Fits 1966-71 427/454. $375 Minimum (Make Inquiry)
COIL: Click for photo transistorized ignition, 12 volt, Corvette; (use with tach drive distributor) $79 Minimum
AMPLIFIER IGNITION PULSE: T.I. Corvette; (for use with tach drive distributor) $174 Minimum
MISCELLANEOUS PARTS FOR SALE:
MAKE INQURIY FOR ANY PARTS YOU CANNOT FIND
Carburetors, carb kits/ parts/ filters. distributor caps, rotors, points, condensers. Ignitor & Mallory Unilite conversions. Spark plugs/ spark plug wire sets etc.
WATER PUMP TRW: heavy duty, epoxy black paint; fits (65-70) Corvette 396-427-454 V8's and also Chevrolet V8's $79
CORVETTE CAR COVER: Covercraft (Evolution 4) 50008, size C - A Steal at $99
CAR COVER: Coverite polycotton size D (universal) A Steal at $40
OLDSMOBILE ITEMS FOR SALE
Mallory dual point distributor, hi performance; Click For Photo; Includes distributor cap, rotor, outside condenser. Model #YCM 250C; full centrifugal advance. Fits 1949-58 Olds 304, 324, 371 c.i. V8 (Also some Pontiac V8's) RARE FIND! A steal at $235
THIS ITEM HAS BEEN SOLD. ANOTHER SATISFIED CUSTOMER.
Delco Remy/GM stock distributor (conversion); Includes dual points, distributor cap, rotor, outside condenser, vacuum advance; Model #1108504811/4E11 (you will need your stock gear from your Olds distributor) Fits 1949-58 Olds 304, 324, 371 c.i. V8; RARE FIND! A steal at $170
THIS ITEM HAS BEEN SOLD. ANOTHER SATISFIED CUSTOMER.
WE BUY OLDSMOBILE PARTS 1949-1958 V8's. (Only 1958 V8 engines; 371 c.i.) Tri-power carburetors - intake manifolds; Only 1954-55 Four speed hydro automatic transmissions, chrome windshields w. arms, blades, emblems, miscellaneous stuff etc.
Specific Parts I need
1. (2) HARMONIC BALANCERS click for photo - (2) TIMING COVER SEALS (fits 1957 - 1958: Oldsmobile 371 c.i. V-8 engines
2. POWER STEERING HOSES for '54 Olds only.
3. HEATER CONTROL VALVES for '54 Olds only.
4. VALVE COVERS for '49-'58 Olds only.
5. TRI-POWER LINKAGE KITS for '57-'58 Olds only. (Rochester carburetors)
6. Etal: TRI-POWER LINKAGE KITS '67-'69 Corvette 427 V8's only. (Click for photos to view tri-power linkage/carburetors and valve covers)
Oldsmobile has become <extinct>
Oldsmobile 1949-50 304 c.i. stock V8's held all NHRA drag strip titles 1949 thru 1952
SAVY CAR PEOPLE KNOW:
HOLLEY PERFORMANCE,INC. Stopped Making New Carburetors For Corvette Tri-Powers,
Dodge Tri-Powers, Muscle Cars Over 3 Years Past.
AVAILABLE: Used, Rebuilt, Remanufactured Carburetors, i.e.
Any Loco Telling You About Matching Numbers Is JOKE.
With In 2000 Miles @ 20 Degree Below Temps Alone In PENNSYLVANIA--These Carburetors & Metering Plates Warp So Bad From Engine Heat Alone.
They Fill Up Your Engines With Gasoline.
I AM NOT IN BUSINESS: To Sell You Mickey Mouse Junk Carburetors--Nor To Get Greedy Rich--
I've Owned 7 Corvettes--Nobody Will Bullshit Me About Any Cars/Trucks.
You Want New, Rebuilt, Remanufactured Carburetors-- I HAVE IT OR NOT: In Inventory
You Will Pay $ Retail For Carburetors, Metering Plates, Misc Carburetor Parts.
YOU: Become Customer Of Mine, Then I Will Give You Free Tech Advice & Give You $ Good Discount.
ALL ABOVE PRICES DO NOT INCLUDE SHIPPING CHARGES
Car Care Products MOTHERS.COM Car Care Products
"Some companies stand by their Products;
I Bought Mothers Mag Polish 10 oz + Tax $10.98.
Weeks later I polish my Oldmobile's Mags and the polish is oozing out of the bottom of the bottle.
I e-mailed Mothers and they sent me two new bottles. The first bottle lasted me almost 10 years!"
...NOTHING CLEANS, POLISHES & SHINES YOUR WHEELS LIKE MOTHERS...
